Customer Reviews: Read 48 more reviews...
 great product. works wonderfully. October 4, 2008
James Sullivan (northern New Mexico)
The installation took most of one afternoon. During my first road test, the module was not working properly, but that was because I did not secure the actuator cable rigidly enough. That problem was solved easily by using the metal brackets supplied in the kit. Everything is included in this kit. The only thing I needed to install it was common hand tools and a multimeter to ensure the vehicle wiring was as I suspected. The instruction booklet s very good, but the vehicle specific attachment locations for my VW were not very helpful with the color specifications. Finding the the correct transmission and distributor wires required a some though and the multimeter for confirmation, but I got it all correct the first time. I highly recommend this product. The only problems I've had using it are it doesn't hold the speed constant driving up steep hills and it does not disengage when the clutch is depressed, but those are probably specific to my vehicle, and adjusting the sensitivity might correct them.
Relatively easy, though time consuming install September 15, 2008
Michael D. Walker
I installed this unit about a year ago on a 2004 Turbocharged MX5 with six speed manual. The install was very smooth despite the manual being vague at times. I will say that you should be somewhat proficient in car wiring, or at least know your own car, otherwise this is not an install for you. Also, set aside some time, several hours at the least to lay out the wiring and the parts you will need
The unit works almost flawlessly, only occasionally dropping a mile or two an hour which can be annoying at times (though it may just be my speed signal). The unit has a very good threshold before dropping out and is easy to control. I was even able to update my OEM switchgear to control it, as mine didn't come with the option installed.
All in all, this is a wonderful product that I have little problem with, and for a universal unit is excellent.
 ccs100 aftermarket cruise control September 13, 2008
Michael J. Mcclure (Indiana)
This product was fairly easy to install but the instruction leave a little to be disired. There are a few extra pieces needed if you have a four cylinder car you are putting this on which raises the cost of installation. Overall though a good product.
Difficult but Fantastic Tech Support September 1, 2008
Larry R. Alverson (Grant, MI)
I found Tech support fabulous!. I had some problem getting the cruise to engage. Tech support told me how to wire a single pole double throw resistor.The problem comes with LED tailigts, not to anyone using LED you will need to check the cold side of brake wiring and if any power registers, use the resisitor.
That was not the end of my complications. I also needed to isolate the input to only VSS and ground the tach wire. I simply could not have done this project without tenacious and competent techs. I learned a ton, but you better stick with this or it will beat you. Well Done Techs!
 Cruise control August 7, 2008
George A. Thompson
The item didn't work because of the year of my vehicle (2005 Frontier). the ad seemed to imply it would work or at least that's how I interpeted it. Fortunately someone had a earlier model Frontier that bought it from me so I didn't have to return it (just luck I guess). What the manufactuer needs to do is state that 2005 Frontiers and later are not candidagtes for after market cruise controls.
|
